Setting the Execution Time for Manual Stapling

When using manual stapling, you can set the time until stapling is performed after the paper is inserted. For details on manual stapling, see "Manual Stapling."
NOTE
This mode can be set when the Inner Finisher-G1 is attached. (See "Inner Finisher-G1.")
1.
Press (Settings/Registration).
2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Time Until Stapling Starts in Stapler Mode].
3.
Press [-] and [+] to set the execution time → press [OK].
12HC-08C