DADF-AQ1

Parts and Their Functions

1.	Feeder Cover Open this cover to remove jammed paper.
2.	Original Set Indicator Lights when originals are placed in the original supply tray.
3.	Slide Guides Adjust these guides to match the width of the original.
4.	Original Supply Tray Originals placed here are automatically fed sheet by sheet into the feeder. Place originals into this tray with the surface that you want to scan face up.
5.	Original Output Area Originals that have been scanned from the original supply tray are output into the original output area.
6.	Original Output Indicator Lights up when originals are being output and flashes for a certain period after the originals have finished being output, to prevent the user from forgetting to take their originals.
7.	Platen Glass Use the platen glass when scanning books, thick originals, thin originals, transparencies, etc.
8.	Document Feed Scanning Area Scans documents sent from the feeder.

CAUTION
Do not insert your fingers into the gaps around the original supply tray, as your fingers may get caught.

IMPORTANT
Be careful not to drop objects, such as paper clips into the gaps, as doing so may cause damage to the machine or cause it to break down. When using the platen glass to copy or scan thick originals, such as books or magazines, do not press down hard on the feeder. If the original output area is blocked, originals may get damaged, and printing may not be performed correctly. Therefore, do not place any objects in the original output area.

IMPORTANT

Be careful not to drop objects, such as paper clips into the gaps, as doing so may cause damage to the machine or cause it to break down.

When using the platen glass to copy or scan thick originals, such as books or magazines, do not press down hard on the feeder.

If the original output area is blocked, originals may get damaged, and printing may not be performed correctly. Therefore, do not place any objects in the original output area.