Setting Manual Distribution
You can set to manually deliver device information.
1.
Press 
(Settings/Registration).
(Settings/Registration). 2.
Press [Management Settings] → [Device Management] → [Device Information Distribution Settings].
3.
Press [Manual Distribution] for <Transmitting Settings>.
4.
Specify each setting → press [Next].
Press [On] for an item to deliver that data.
If you press [On] for <Settings/Registration Value>, set <Network Settings>. You can press [Include] → [OK] to deliver the network settings.
5.
Select the destination → press [Start Manual Distribution].
If you want to cancel the distribution, press [Cancel].
When distribution is complete, confirm the distribution results displayed in the 'Status' column on the Manual Distribution screen.
|
NOTE
|
|
Even if you press [Cancel], distribution will not be cancelled for machines to which information has already been delivered. Distribution to the next selected machine will be cancelled.
|
6.
Press [OK] → [OK].
|
IMPORTANT
|
|
When delivering device information, the following machines will not update their information:
Machines which are processing a send job
Machines importing or exporting data via the Remote UI
The client machine which is receiving device information from another host machine will not update the address book.
The client machine which is performing a print job will not update the printer settings.
|