Different Size Originals

This mode enables you to set different size originals together and copy them all at once.

IMPORTANT
Take note of the following when placing originals with different widths in the feeder: Set your originals against the back edge of the feeder. Use the following combinations of originals. Setting other combinations may result in damage to your originals. A3 and B4, B4 and A4R, A4 and B5, B5 and A5, A4R and B5R, A5 and B6 The image may be distorted diagonally when copied. Stapling cannot be performed when copying on various paper sizes. Always smooth out any folds in your originals before placing them into the feeder.

IMPORTANT

Take note of the following when placing originals with different widths in the feeder:

Set your originals against the back edge of the feeder.

Use the following combinations of originals. Setting other combinations may result in damage to your originals.

A3 and B4, B4 and A4R, A4 and B5, B5 and A5, A4R and B5R, A5 and B6

The image may be distorted diagonally when copied.

Stapling cannot be performed when copying on various paper sizes.

Always smooth out any folds in your originals before placing them into the feeder.

Press [Copy].

Press [Options] → [Different Size Originals].

Select the type of different size originals → press [OK] → [Close].

[Same Width]:	Press this if you are placing originals with the same width.
[Different Width]:	Press this if you are placing originals with a different width.

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions." If the originals are placed in the feeder, make sure that the different size originals are of the same weight (paper type). If you set the Different Size Originals mode, the scanning speed may be slower than normal.

NOTE
If you use [1-Sided2-Sided] with [Different Size Originals], copies will be printed as one-sided copies on paper of their respective sizes.