Preferences

All the settings about the display are listed with short descriptions. Default settings are marked with a dagger (


If a screen for entering a PIN is displayed Enter the PIN with the numeric keys and press . Setting the System Manager PIN Asterisks () Settings marked with an asterisk (1) have different defaults depending on the country or region of purchase. Settings marked with an asterisk (*2) are unavailable depending on the country or region of purchase

If a screen for entering a PIN is displayed

Enter the PIN with the numeric keys and press

. Setting the System Manager PIN

Asterisks (*)

Settings marked with an asterisk (*1) have different defaults depending on the country or region of purchase.

Settings marked with an asterisk (*2) are unavailable depending on the country or region of purchase

Display Settings

Language*1

Select the display language used for the display, reports, and lists.

English

French
Spanish
Portuguese

Select a language

Remote UI Language*1

Select the display language used for the Remote UI screens.

English

French
Spanish
Portuguese

Select a language

Contrast

Adjust the brightness of the display to suit the installation location of the machine.

Five Levels

Use

to adjust the brightness

Invert Screen Colors

Select <On> to invert the display colors. Select <On> if the display is hard to view even after the brightness was adjusted in <Contrast>.

Off

Select <On> or <Off>

Millimeter/Inch Entry Switch*1

Select the unit of measurement.

Millimeter

Inch

Select <Millimeter> or <Inch>

Gram/Pound Switch*2

Select the unit of measurement for the basis weight.

Gram

Pound

Select <Gram> or <Pound>

Message Display Time

Specify the interval in seconds at which two different messages are alternately displayed.

1 to 2

to 5 (sec.)

Enter a number for the interval

Scrolling Speed

Adjust the speed for scrolling the screen by selecting from three levels.

Slow
Standard

Fast

Select the speed

Cursor Movement

Configure how the cursor moves after a character is entered on the screen. Select <Auto> to automatically move the cursor to the right of the entered character. Select <Manual> to manually move the cursor to the right of the entered character.

Auto

Manual

Select <Auto> or <Manual>