Preferences
 
All the settings about the display are listed with short descriptions. Default settings are marked with a dagger ().
If a screen for entering a PIN is displayed
Enter the PIN with the numeric keys and press . Setting the System Manager PIN
Asterisks (*)
Settings marked with an asterisk (*) have different defaults depending on the country or region of purchase.

Display Settings

Language*
Select the display language used for the display, reports, and lists.
Chinese (Simplified), Chinese (Traditional), English,French, Japanese, Korean, Portuguese, Spanish, Thai, Vietnamese
Remote UI Language*
Select the display language used for the Remote UI screens.
Chinese (Simplified), Chinese (Traditional), English, French, Japanese, Korean, Portuguese, Spanish
Contrast
Adjust the brightness of the display to suit the installation location of the machine.
Five Levels
Invert Screen Colors
Select <On> to invert the display colors. Select <On> if the display is hard to view even after the brightness was adjusted in <Contrast>.
Off
On
Millimeter/Inch Entry Switch
Select the unit of measurement.
Millimeter
Inch
Message Display Time
Specify the interval in seconds at which two different messages are alternately displayed.
1 to 2 to 5 (sec.)
Scrolling Speed
Adjust the speed for scrolling the screen by selecting from three levels.
Slow
Standard
Fast
Cursor Movement
Configure how the cursor moves after a character is entered on the screen. Select <Auto> to automatically move the cursor to the right of the entered character. Select <Manual> to manually move the cursor to the right of the entered character.
Auto
Manual
0LC7-053