Making a Simple Wireless Connection Using Direct Connection (Access Point Mode)
Even in an environment with no access points or wireless LAN routers, you can connect to the machine directly from your mobile device. This enables you to print from your mobile device whenever you want to, without difficult connection settings.
Using the Machine in Direct Connection (in Access Point Mode)
You can use this machine as an access point. To do so, set <Enable Direct Connection> to <On> beforehand. Configuring the Settings for Direct Connection (Access Point Mode)
<Direct Connection> 
Connect from the mobile device using the displayed SSID and network key. The Direct Connection screen is displayed.
Connect from the mobile device using the displayed SSID and network key. The Direct Connection screen is displayed.
<Connect. Info.>
You can view the information on the Direct Connection being proceeding.
<Disconnect>
Stops the Direct Connection procedure.
|
|
|
While in Direct Connection, you may not be able to connect to the Internet depending on your mobile device.
Direct Connection is only possible as a one-to-one connection between the machine and a single mobile device. You cannot connect 2 or more mobile devices to the machine at a time.
If wireless connection from the mobile device is not performed within 5 minutes while the SSID and network key are displayed, the connection waiting state terminates.
If while in communication by Direct Connection, a duration when there is no data transmission between the machine and the mobile device lasts for some time, the communication may terminate.
The machine's SSID and network key are changed each time the Direct Connection procedure is started.
While in Direct Connection, sleep mode is not as effective at saving power.
When both <Enable Direct Connection> and <Enable NFC> are set to <On>, sleep mode is not as effective at saving power even if not in Direct Connection.
If you use the direct connection, do not set the IP address manually on the mobile device. Doing so may prevent proper communication after using the direct connection.
|
 |
Using NFC together with Access Point ModeYou can use NFC and Access Point Mode in combination. By simply touching your mobile device to the NFC mark on the operation panel of the machine, you can read out the machine's SSID and network key automatically. Printing by Touching a Mobile Device to the Machine (NFC) (MF729Cdw / MF726Cdw)
|