Specifying Previously Used Destinations (Fax)

 
You can select a destination from among the past three destinations. When you specify a previously used destination, the machine also sets the same fax settings such as density you used the last time you sent documents to that destination.
When <Restrict Resending from Log> is set to <On>, you cannot use this feature. Disabling Use of Previously Used Destinations
Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and disables this feature. Limiting Available Destinations
The destinations in Manual Sending are not available for this feature. Making a Call before Sending Faxes (Manual Sending)
When you specify a destination using this feature, any destinations that you have already specified are deleted.
1
Press  and tap <Fax>.
When the logon screen appears, use the numeric keys to enter the user name and password. Then select the authentication server and press Logging on to Authorized Send
2
Select <Destination>  <Recall Set.>.
3
Select a destination.
If you are using a sequential broadcast log, only the address specified for the first transmission is displayed, but all the destinations are specified. Sending Faxes to Multiple Destinations Simultaneously (Sequential Broadcast)
.
The selected destination and the fax settings used at the time are specified. You can also change the settings before sending.
To delete destinations
If you used a sequential broadcast log, you can delete destinations as necessary.
0SCJ-02S