Platen Glass
Regularly wipe off the dust from the platen glass and the underside of the feeder or the platen glass cover to prevent smudges to be printed on documents or printouts.
1
Turn OFF the machine, and unplug the power cord from the AC power outlet.
When you turn OFF the machine, data that is waiting to be printed is deleted. Fax documents that were received by using the Memory Reception function, faxes that are waiting to be sent, and reports that are automatically printed after sending and receiving faxes are not deleted.
2
Open the feeder or the platen glass cover.
3
Clean the platen glass and the underside of the feeder or the platen glass cover.
Clean the areas with a cloth dampened with water. Then, wipe the area with a soft, dry cloth.
For MF729Cx / MF628Cw, in addition to the platen glass and underside of the feeder, make sure to clean and wipe the white strip of plate (
) and the transparent plastic area (
) too.
) and the transparent plastic area () too.
When wiping the transparent plastic area (), take care not to bend the plastic.
), take care not to bend the plastic.4
Wait for the cleaned area to dry completely.
5
Gently close the feeder or the platen glass cover.
6
Reconnect the power cord and turn ON the machine.