Switching 1-Sided and 2-Sided Printing 

 
If you are using the MF729Cx, you can make both 1-sided and 2-sided printouts. The default setting is [2-sided Printing]. Change the setting as necessary.
2-sided printing may not be available with some sizes and types of paper. Paper
[Basic Settings] tab Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/Booklet Printing] Select the position to bind in [Binding Location] [OK]

[1-sided/2-sided/Booklet Printing]

Select [1-sided Printing] or [2-sided Printing].
For [Booklet Printing], see Printing Booklet (MF729Cx).

[Binding Location]

Specify the position to bind the printouts with a binding tool such as a stapler. Printing orientation will be changed depending on the specified binding position. To specify the margin width for the binding position, click [Gutter].
[Long Edge [Left]]
Prints images in such a way that the printed pages are opened horizontally when bound.
[Short Edge [Top]]
Prints images in such a way that the printed pages are opened vertically when bound.
[Gutter]
Specify a binding margin.
0SCK-04A