Questions & Answers
The background you wanted to remove has been scanned in. (only for Color Network ScanGear)
Perform the following steps:
|
1.
|
In the [Main] sheet, select [Manual] from [Density Adjustment] → select [Remove Background] from [Image Quality Adjstmnt].
|
|
2.
|
Click [Fine Adjustment] to display the [Adjustments for Background Removal] dialog box.
|
|
3.
|
Adjust the density of the background colors by moving the sliders for each color in the dialog box.
|
Dark borders and frame lines that appear around the original have been scanned.
Perform the following steps:
|
1.
|
Right-click in the Preview Area to display a pop-up menu.
|
|
2.
|
On the pop-up menu, point to [Original Frame Erase] → click [On].
|
After the document has been scanned to 100%, the scanner stops and the time taken to read the data is usually long.
If the operating system includes the Windows Firewall function and that function has been enabled, it may take some time for scanning to finnish. Verify whether UDP ports can be registered as exceptions are automatically registered at the time of installation. If the appropriate UDP port has not been registerd, it will have to be registered manually.
[Name]: Enter a name
[Port number]: 56338
[Protocol]: Select [UDP]
For Windows 7:
|
1.
|
Click [
 ](Start) → [Control Panel] → [System and Security] → [Windows Firewall] → [Advanced Settings]. |
|
2.
|
Select [Inbound Rules] in the [Windows Firewall with Advanced Security] sheet → click [New Rules].
|
|
3.
|
In [New Inbound Rule Wizard], select [Port] → click [Next].
|
|
4.
|
Select [UDP] → enter 56338 in [Specific local port] → click [Next].
|
|
5.
|
Select [Allow the connection] → click [Next].
|
|
6.
|
Select only [Private] → click [Next].
|
|
7.
|
Enter a name in [Name] → click [Finish] to close [New Inbound Rule Wizard].
|
For Windows Vista/Windows Server 2008:
|
1.
|
Click [
](Start) → [Control Panel] → [Security] → [Windows Firewall] → [Allow a program through Windows Firewall]. |
|
2.
|
In the [Exceptions] sheet, click [Add Port].
|
|
3.
|
In the [Add a Port] dialog box, enter a name for [Name] → enter 56338 for [Port number] → select the check mark next to [UDP] → click [OK].
|
|
4.
|
Click [OK] and close the [Windows Firewall] dialog box.
|
For Windows XP/Windows Server 2003:
|
1.
|
Click [Start] → [Control Panel] → [Security Center] → [Windows Firewall] under [Manage security setting for].
|
|
2.
|
In the [Exceptions] sheet, click [Add Port].
|
|
3.
|
In the [Add a Port] dialog box, enter a name for [Name] → enter 56338 for [Port number] → select the check mark next to [UDP] → click [OK].
|
|
4.
|
Click [OK] and close the [Windows Firewall] dialog box.
|
|
NOTE
|
|
The above procedures vary according to the edition and system settings of the operating system you are using.
|