Default Display after Auto Reset

To "Settings/Registration Table."
You can set whether the screen set as the Default Screen at Startup is displayed after the Auto Reset mode initiates.
1.
Press (Settings/Registration).
2.
Press [Preferences] → [Timer/Energy Settings] → [Function After Auto Reset].
3.
Specify the following settings → press [OK].
Details of each item are shown below:
[Initial Function]:
The screen set for [Default Screen at Startup] is displayed after the Auto Reset mode initiates.
[Selected Function]:
The display does not return to the screen set for [Default Screen at Startup] after the Auto Reset mode initiates.
Example: If [Copy] is set for Default Screen at Startup
If [Initial Function] is set and the machine is idle for a certain period of time after an operation on the Access Stored Files screen, the Auto Reset mode initiates and the display returns to the default screen of the Copy function.
If [Selected Function] is set and the machine is idle for a certain period of time after an operation on the Access Stored Files screen, the Auto Reset mode initiates and the display returns to the default screen of the Access Stored Files function.
NOTE
You can set the time for the Auto Reset mode to initiate. (See "Auto Reset Time.")