Trace & Smooth Settings
You can change the recognition rate of line drawings of the original when creating a file with outline graphics.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Function Settings] → [Common] → [Generate File].
3.
Press [Trace & Smooth Settings].
4.
Select [On] for <Outline Graphics> → specify the settings for <Graphics Recognition Level>.
|
Details of each item are shown below.
|
|
|
<Graphics Recognition Level>:
|
|
|
[Normal]:
|
Sets a standard recognition level. (The data size becomes small.)
|
|
[Moderate]:
|
The recognition level and data size are in between those of [Normal] and [High].
|
|
[High]:
|
Sets the highest recognition level. (The data size becomes large.)
|
|
NOTE
|
|
If you increase the <Graphics Recognition Level>, the data size also increases. It is recommended that you first use [Normal], and if desirable results are not obtained, to try increasing the recognition level to [Moderate] or [High].
|
You can specify the setting for the image quality level of the background in <Background Image Level>. Specify the setting → press [OK].
|
Details of each item are shown below:
|
|
|
<Background Image Level>:
|
|
|
[Data Size Priority]:
|
The data size is small, but the background image quality is low.
|
|
[Normal]:
|
The data size and background image quality are in between those of [Data Size Priority] and [Image Priority].
|
|
[Quality Priority]:
|
The data size is large, but the background image quality is high.
|
Select [Off] if you do not want to perform Outline Graphics.
|
NOTE
|
|
This setting is disabled when sending a fax or I-fax.
|