Fax TX Report

To "Settings/Registration Table."
The Fax TX Report enables you to check whether documents were sent correctly to their intended
destinations. A Fax TX Report can be printed automatically after the documents are sent. You can also set the machine to print a Fax TX Report only when a transmission error occurs, and adjust the Fax TX
Report setting to print the first part of the document as part of the report to remind you of the document's contents.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
NOTE
Reports can only be printed if 11" x 17", LGL, LTR, or LTRR (plain, recycled, or color paper) paper is loaded in the paper sources whose settings in Other in [Paper Drawer Auto Selection On/Off] are set to 'On'. However, if you set [Consider Paper Type] to 'On' for Copy in [Paper Drawer Auto Selection On/Off], you cannot print from paper sources set to use color paper. (See "Enabling Paper Drawer Auto Selection.")
1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Send] → [Fax Settings].
3.
Press [Fax TX Report].
4.
Select [For Error Only] or [On].
Select [Off] if you do not want to print it.
If you want to print part of the sent document on the Fax TX Report, select [On] for <Report with TX
Image>
5.
Press [OK].
NOTE
If [TX Report] in [Function Settings] (Settings/Registration) is set to 'For Error Only' or 'On', a Send TX
Report is printed with the Fax TX Report.
If a sequential broadcast transmission is performed when Fax TX Report is set to On, a Fax Multi TX Report is printed. (See "Fax Multi TX Report.")
For more information on the Fax TX Report, see "Fax TX Report/Fax Error TX Report."