Reading Messages from the System Manager
The System Manager uses the Message Board feature of the machine to convey messages to the users of this machine. The messages are sent through the Remote User Interface and displayed on the touch panel display. (See "Overview of This Function.")
The following three types of message boards are available:
|
NOTE
|
|
You can use the message board only if the machine is connected to a network.
|
A Message Board without [OK]
A Message Board with [OK]
If you press [OK] and close the message board, you can perform normal operations. The message appears again when you turn the main power OFF and then turn back ON, or after the Auto Reset mode has activated.
A Message Board Where the Message Appears on the bottom line of the touch panel display
|
NOTE
|
|
For instructions on deleting the message board, see "Clearing the Message Board."
The Auto Reset mode does not activate if Auto Reset Time is set to '0'. (See "Auto Reset Time.")
|