Combination of Functions Chart

*1 Combination available when the Job Build mode is set.

*2 Cannot be set if the scan size is [11" x 17"+].

*3 Combination available if the resolution is 300 x 300 dpi.

*4 The PDF (Compact) mode is set at the same time.

*5 [Divide into Pages] is set to 'On'.

*6 [Divide into Pages] is set to 'Off'.

*7 Available if the original is placed on the platen glass.

*8 Cannot be set if you select the Black & White mode.

*9 If [Password Required to Change Permiss.] is set, you must set [Allow Changes] to [Changes but Extract Pages] in order to set digital signature settings.

*10 If [Password Required to Change Permiss.] is set, you must set [Allow Changes] to one of the following in order to set the Reader Extension mode:

*11 Available if the resolution is 300 x 300 dpi or 600 x 600 dpi.

*12 Cannot be set if you set [Optimize PDF for Web] to 'On'.
If Digital Signature and Reader Extensions are both set for a PDF file, changes made after the signature is applied are stored as Comments in the PDF file.

*13 Visible Signatures can only be set when a device signature or user signature is set for the PDF file.
You cannot specify these settings when [Format PDF to PDF/A] is set to 'On'.

*14 The settings for [Sharpness] and [Adjust] for <Background Density> are invalid when all of the conditions below are met.