Enabling Auto Collating

To "Settings/Registration Table."
If you set Auto Collate to 'On', the machine automatically sets the Collate (Offset) mode when originals are placed in the feeder.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
1.
Press .
2.
Press [Function Settings] → [Copy] → [Auto Collate].
3.
Press [On] → [OK].
Select [Off] if you do not want to enable auto collating.
NOTE
If Auto Collate is set to 'On' and a finisher is attached, the Collate and Offset Collate modes are set. However, if no finisher is attached, only the Collate mode is set.