Enabling Auto Orientation

To "Settings/Registration Table."
Setting this mode enables the machine to use information such as the size of the original and the zoom ratio to determine the most suitable orientation for the specified paper size. The machine then automatically rotates the image if necessary.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
1.
Press .
2.
Press [Function Settings] → [Copy] → [Auto Orientation].
3.
Press [On] → [OK].
Select [Off] if you do not want to enable auto orientation.
NOTE
If A4 or A5 originals are enlarged onto A3 copy paper, Auto Orientation is not performed even if you select 'On'.
Only the images of standard size originals up to A4 size can be rotated when the copy ratio is set to 100%.
If you set Automatic Paper Selection mode and the most suitable paper size is not available, the paper source that is loaded with paper of the same size is displayed as optimal, even if the orientation is different.