Fax Options

Switching to Direct Sending

You can select whether to send faxes using Memory Sending or Direct Sending.

You can switch to the Direct Sending mode instead of the Memory Sending mode. The Memory Sending mode stores each scanned page in memory before sending, while the Direct Sending mode connects to the recipient before scanning and sending.

Memory Sending

All of the originals are first scanned and read into memory, and then sent. This means that you do not need to stay near the machine once the originals have been scanned.

Direct Send

The machine sends each page of the document to the destination as it is scanned.

Specifying the Sender Name When Sending a Fax

You can specify the Sender Name to use when sending a fax.

Selecting the Telephone Line When Sending a Fax

If you have installed multiple phone lines, you can select the telephone line to use when sending a fax.

Delayed Send

You can set a timer to send a fax at a specified time within 24 hours.

Preview

You can scan a document and then preview its contents before sending your fax. You can also delete scanned pages from the preview as necessary.

Finished Stamp *

You can print a stamp (approximately 3 mm in diameter) on the front side of scanned and sent originals.

Vertical Placement

Horizontal Placement

Job Done Notice

You can set the machine to send a notification to the sender via e-mail when sending a fax is complete.

* : For information on the optional product required to use this function, see"Optional Products Required for Each Function."