Copy Tray-J1

If the Copy Tray-J1 is attached to the machine, the following modes are available:

Collate Mode

The prints are automatically collated into sets arranged in page order.

Group Mode

All prints of the same original page are grouped together into sets.

Rotate Mode

If originals of the same size are printed, the prints are automatically collated into sets arranged in page order.

Parts and Their Functions

1
Output Tray
Paper is output to the output tray.
2
Auxiliary Tray
Pull out the auxiliary tray if you are outputting large size paper.
The following are paper sizes that can be output from the output trays of the machine. However, some paper sizes may not be output depending on the set functions.
: Available - : Unavailable
Paper Size
Output Tray
305 mm x 457 mm
-
SRA3
-
A3
A4
A4R
A5
-
A5R
Envelope
Nagagata 3
-
Yougatanaga 3
-
Kakugata 2
-
COM10 No.10
-
Monarch
-
DL
-
ISO-B5
-
ISO-C5
-
Custom Size
99 mm x 139.7 mm to 320 mm x 457.2 mm
-

NOTE
If both the Copy Tray-J1 and Inner Finisher-C1 are attached to the machine, you cannot use the Rotate mode.