CMYK Simulation Profile

[JapanColor(Canon)], [US Web Ctd(Canon)], [Euro Standard], [None]*, [Download Profile]

This setting allows you to specify the simulation target to print the CMYK (Cyan Magenta Yellow blacK) data. The machine converts CMYK data into a device dependent CMYK colour model based on the simulation target selected in [CMYK Simulation Profile].

[JapanColor(Canon)]

This setting uses the JapanColor profile. This is for obtaining a printout closely matching the printing standard in Japan.

[US Web Ctd(Canon)]

This setting uses the U.S. Web Coated profile. This is for obtaining a printout closely matching the printing standard in the USA.

[Euro Standard]

This setting uses the Euro Standard profile. This is for obtaining a printout closely matching the printing standard in Europe.

[None]

When you select this setting, device dependent CMYK data is printed as is without applying the CMYK profile.

[Download Profile]

You can download the profile from iW Management Console resource management plug-in. You can store up to 100 profiles.

IMPORTANT
You may not be able to use all the profiles that are available. If colour data is printed in gray using a downloaded profile, check the downloaded profile for compatibility.
If the machine receives data with a device independent (CIE based) colour space definition, it is colour processed with the specified settings. Therefore, the CMYK Simulation Profile setting is not applied by the machine.
When you select a setting other than [None], and the machine receives a device dependent colour space definition that is colour processed by the host computer, the CMYK Simulation Profile setting is also applied by the machine.

NOTE
When you select [None], areas of dark colour may be blotchy depending on the data. If a profile with the name of None is downloaded to the machine, the profile is not applied and the None setting on the menu is applied.