Store Location Display Settings

To "Settings/Registration Table."
You can specify the display settings of the store location that is displayed when you use memory media with [Scan and Store] or [Access Stored Files].
1.
Press .
2.
Press [Preferences] → [Display Settings] → [Store Location Display Settings].
3.
Press [On] for <Memory Media> → press [OK].
Select [Off] to hide an item.
If you set to [On].
If you set to [Off].
NOTE
This mode is enabled only after you restart the machine. For instructions on restarting the machine (turning the main power switch OFF, and then ON), see "How to Turn ON the Main Power."