Output Tray Designation

You can designate which output tray to use for specific functions.

The output trays indicated by Tray A, B, and C vary according to the attached optional products.

For information on the optional products required to use this function, see "Optional Products Required for Each Function."

Options Attached	Default Setting	Tray A/B/C
Inner 2 Way Tray-F1	Tray A: Copy, Access Stored Files Tray B: Printer, Receive, Fax, Other
Inner 2 Way Tray-F1 and Copy Tray-J1	Tray A: Copy, Access Stored Files Tray B: Printer Tray C: Receive, Fax, Other
Copy Tray-J1	Tray A: Copy, Access Stored Files Tray B: Printer, Receive, Fax, Other
Inner Finisher-C1 and Copy Tray-J1	Tray A: Copy, Access Stored Files , Printer Tray B: Receive, Fax, Other
Inner Finisher-C1 and Inner Finisher Additional Tray-A1	Tray A: Copy, Access Stored Files Tray B: Printer, Receive, Fax, Other
Inner Finisher-C1, Inner Finisher Additional Tray-A1, and Copy Tray-J1	Tray A: Copy, Access Stored Files Tray B: Printer Tray C: Receive, Fax, Other

Press

(Settings/Registration).

Press [Function Settings] → [Common] → [Paper Output Settings].

Press [Output Tray Settings].

Set the output and priority settings for Tray A/B/C → press [OK].

[Fax] is displayed if the Super G3 Fax is installed.

[Receive] is displayed only if the Color Universal Send Kit is available for use.

<Other> is used for setting the priority for printing reports.

If the Super G3 2nd Line Fax Board is installed, you can set up to two fax lines (Fax Line 1 to 2).

If you want to use an output tray for only one function, select only that function.

To set the tray home position when the Inner Finisher-C1 and Inner Finisher Additional Tray-A1 are attached, select the tray home position to be used while jobs are being processed from the <Tray Home Position> drop-down list.

Details of each item are shown below:
[Tray A]:	Tray A moves closer to the output area.
[Tray B]:	Tray B moves closer to the output area.
[Off]:	The tray home position is not set. The output tray stops at the position it is in when printing finishes.

IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for fax/I-fax documents to prevent them from getting lost. If the Inner Finisher-C1 and Copy Tray-J1 are attached and the Staple mode is set, the sheets are output to Tray A, regardless of the Tray Designation settings. If the Inner Finisher-C1 and Copy Tray-J1 are attached and you select any of the following paper types, the sheets are output to trays other than the Copy Tray-J1, regardless of the Tray Designation settings: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing paper. If the Inner 2 Way Tray-F1 and Copy Tray-J1 are attached and you select any of the following paper types, the sheets are output to trays other than the Copy Tray-J1, even if the Copy Tray-J1 is specified as the destination: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing paper.

IMPORTANT

If a certain tray reaches its stacking limit, the machine automatically uses another tray that is designated for the same function. However, it is recommended that you only designate one tray for fax/I-fax documents to prevent them from getting lost.

If the Inner Finisher-C1 and Copy Tray-J1 are attached and the Staple mode is set, the sheets are output to Tray A, regardless of the Tray Designation settings.

If the Inner Finisher-C1 and Copy Tray-J1 are attached and you select any of the following paper types, the sheets are output to trays other than the Copy Tray-J1, regardless of the Tray Designation settings: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing paper.

If the Inner 2 Way Tray-F1 and Copy Tray-J1 are attached and you select any of the following paper types, the sheets are output to trays other than the Copy Tray-J1, even if the Copy Tray-J1 is specified as the destination: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing paper.

NOTE
You can designate an output tray for multiple functions. The priority order of the output destinations is determined by the order of the selected output trays. The priority is displayed as "1," "2," and "3."