Gamma Value for YCbCr Send Jobs

To "Settings/Registration Table."
If you are sending to an e-mail or file server destination, you can specify the gamma value to use when converting scanned RGB image data to YCbCr. You can ensure sent image data can be printed with the appropriate image quality by setting a gamma value corresponding to the gamma value at the receiving end.
If you are using the imageRUNNER ADVANCE C2020, depending on the region, the optional product is required to use this function. For information on the optional product, see "Optional Products Required for Each Function."
1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Send] → [Common Settings].
3.
Press [YCbCr TX Gamma Value].
4.
Select a gamma value → press [OK].

NOTE
This setting is disabled when sending faxes.