Using SMTP Authentication for Each User

To "Settings/Registration Table."
You can set to use SMTP authentication for each logged in user when using a login service.
If you are using the imageRUNNER ADVANCE C2020, depending on the region, the optional product is required to use this function. For information on the optional product, see "Optional Products Required for Each Function."
1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Send] → [E-Mail/I-Fax Settings].
3.
Press [Use SMTP Authentication for Each User].
4.
Press [On] → [OK].
Select [Off] if you do not want to use SMTP authentication.
NOTE
If you press  on the top right of the [Scan and Send] screen, and then select [Set SMTP Authentication] from the displayed menu, you can register the user name and password for the logged in user.