Full Mode TX Timeout

To "Settings/Registration Table."
You can set the time before sending operations automatically terminate if a notification e-mail message (MDN) is not received from the recipient when sending an I-fax in the Full Mode.
If you are using the imageRUNNER ADVANCE C2020, depending on the region, the optional product is required to use this function. For information on the optional product, see "Optional Products Required for Each Function."
1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Send] → [E-Mail/I-Fax Settings].
3.
Press [Full Mode TX Timeout].
4.
Specify the time by pressing [-] or [+] → press [OK].