R-key Setting

To "Settings/Registration Table."
If your machine is connected to a PBX (Private Branch Exchange), it is necessary to set the access method.
You can set the PBX type to [Prefix] or [Hooking]. If you register the outside line access number in the R-Key, you can easily access the outside line.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Send] → [Fax Settings].
3.
Press [R-key Setting].
4.
Specify each setting → press [OK].
[PSTN]: Select if your machine is connected to an outside line.
[PBX]: Select if your machine is connected through a PBX.
If you select [PBX]:
Select [Prefix] or [Hooking].
If you select [Prefix](outside line access number), press [CODE] → enter the prefix code using - (numeric keys) → press [OK].
NOTE
Make sure to enter a pause after the prefix code. If you press [Pause] to enter a pause, <P> is displayed.
If you do not insert a pause, the prefix code is not registered.