Other Useful Functions

This section describes other useful functions that the machine can use.

If a paper drawer runs out of paper during printing, the machine automatically locates another paper drawer loaded with the same size paper, and begins feeding paper from that paper drawer.

If the machine is not used for a specified period of time after the last print job or key operation is performed, the set function automatically returns to the screen set in [Default Screen at Startup].

If you set [No. of Copies/Job Duration Status] to 'On' in [Preferences] (Settings/Registration), the number of copies specified and the approximate time before the current job completes is displayed on the bottom line of the touch panel display.

The paper supply indicator shows the remaining amount of paper in each paper drawer on the Paper Select screen, and on the screen that appears when paper in a paper drawer has run out during printing.

There are four different paper supply indicators, as shown below:

Using information, such as the size of the original and zoom ratio, the machine automatically rotates the image to the most suitable orientation for the selected paper size.

If the image does not fit onto the paper after it is rotated, the machine will not rotate the image, and will print it as is, with part of the image cut off.

Even if the [Auto Orientation] is set to 'On', the image may not rotate. For more information, see "Combination of Functions Chart."