Entering International Fax Numbers
This section describes only the procedure for entering fax numbers.
|
NOTE
|
|
The pause time differs in length, depending on whether it is entered in the middle or end of a fax number.
The pause time entered in the middle of a fax number (lower-case p) is set to four seconds long by default. This length can be changed to any number between 1 and 15 seconds. (See "Pause Time.")
The pause time entered at the end of a fax number (upper-case P) is set to 10 seconds long. (This length cannot be changed.)
Two or more pauses can be entered consecutively.
The location of a pause and the actual pause time may differ depending on the telephone system. Contact your local authorized Canon dealer or your local telephone company for further details.
|
1.
Press [Fax].
2.
Enter the international fax number → press [Pause].
Example:
International Dialing Code: 010
Country code: 1
Area code: 516
Fax number: XXX-XXXX
[Pause]: Enter the pause time equivalent in length to the time required for the dial tone to be heard
after dialing is completed.
[Backspace]: Press when a wrong number is entered. The number immediately to the left of the
cursor is deleted, enabling you to enter the correct number.
|
NOTE
|
|
Press [+] after the country code, and before the fax number.
|
3.
Press [OK].
The specified destination appears in the destination list on the Send Basic Features screen.