Touch Panel Display Transition

The following is a flow diagram of the touch panel display used in this category.

Specify the network settings from the Settings/Registration screen displayed by pressing

(Settings/Registration).

To move up one level, press [Up].

IMPORTANT
Settings specified from the control panel become effective after the machine is restarted, after the procedure. Turn OFF the machine, wait at least 10 seconds, and then turn it ON.

NOTE
System Manager Information (System Manager Department ID/System Manager PIN) is set by default in the machine. As a result, administrators are required to enter a system manager department ID and system manager PIN in the Settings/Registration screen to log in. The default settings for the system manager department ID and system manager PIN are both "7654321." These should be changed to more suitable values. For more information on the system manager department ID and PIN, see "Flow of Operations for Administrators." For instructions on how to turn ON/OFF the machine, see "Main Power and Control Panel Power."

NOTE

System Manager Information (System Manager Department ID/System Manager PIN) is set by default in the machine. As a result, administrators are required to enter a system manager department ID and system manager PIN in the Settings/Registration screen to log in. The default settings for the system manager department ID and system manager PIN are both "7654321." These should be changed to more suitable values. For more information on the system manager department ID and PIN, see "Flow of Operations for Administrators."

For instructions on how to turn ON/OFF the machine, see "Main Power and Control Panel Power."