Output Profile


[Normal], [Photo], [TR Normal]*, [TR Photo], [Download Profile]

This setting allows you to define the profile that is appropriate for the data you are going to print. It is applied to all data in the print job, so make sure the selected profile is right for your job.
Settings can be applied separately for text, graphics, and image data.
Under most circumstances, it is preferable to select [Normal] for text and graphics data, and [Photo] for image data.

[Normal]

This setting prints the colours closely matching the ones displayed on your monitor.

[Photo]

This setting prints colours close to photographic prints.

[TR Normal]

This setting prints the colours closely matching the ones displayed on your monitor, and also reduces toner bleeding of text and fine lines.

[TR Photo]

This setting prints colours close to photographic prints, and also reduces toner bleeding of text and fine lines.

[Download Profile]

You can download the profile from iW Management Console resource management plug-in. You can store up to 100 profiles.

IMPORTANT
If you select [Download Profile], [Render Color Space] is specified as [CMYK].
NOTE
If you are using the imageRUNNER ADVANCE C2020, depending on the region, the 2.5inch/80GB HDD is required to download a profile.
If a profile with the name of None is downloaded to the machine, the profile is not applied and the None setting on the menu is applied.
If you [None] for [RGB Source Profile] or [CMYK Simulation Profile], or if you select [Off] for [Use Grayscale Profile], an Output Profile setting is not applied to device dependent color data.