Starting the Remote UI

To start the Remote UI, follow the procedure described below.

The portal page appears when you start the Remote UI. You can check the current status of the device on the portal page.

Starting the Remote UI

Start your Web browser → enter the following URL into [Address] or [Location].

http://<the IP address of the device>/

NOTE
If you do not know the appropriate URL, consult your system administrator. If the Remote UI does not start properly and an error message appears, delete the cache files of your Web browser.

Enter the required data → click [Log In].

If SSO-H is set as the login service:

IMPORTANT
To be able to log in using SSO-H, it is necessary to match the current time on the computer in which Active Directory is running and the computer to log in with. If there is more than a 30 minute difference in the current time set in the computers, an error occurs when you log in using SSO-H.

NOTE
If the Default Authentication and System Manager Settings are set, and the Department ID Management is not set, follow the procedure below to log in. If you are a system manager, enter the System Manger ID and System Password to log in. If you are a general user, click [Regular User Login]. If Default Authentication and Department ID Management are set, enter the Department ID and password to log in. SSO-H performs authentication for users registered in Active Directory. You can use only alphanumeric characters,- (hyphen), or _ (underscore) for a user name for SSO-H authentication. You can log in only if you use valid characters. You can select up to four trusted domains in addition to the domain the machine belongs to for the DNS domains for SSO-H. Even if you install multiple login services, they cannot be used simultaneously. Only the login screen for the set login service appears.

NOTE

If the Default Authentication and System Manager Settings are set, and the Department ID Management is not set, follow the procedure below to log in.

If you are a system manager, enter the System Manger ID and System Password to log in.

If you are a general user, click [Regular User Login].

If Default Authentication and Department ID Management are set, enter the Department ID and password to log in.

SSO-H performs authentication for users registered in Active Directory.

You can use only alphanumeric characters,- (hyphen), or _ (underscore) for a user name for SSO-H authentication. You can log in only if you use valid characters.

You can select up to four trusted domains in addition to the domain the machine belongs to for the DNS domains for SSO-H.

Even if you install multiple login services, they cannot be used simultaneously. Only the login screen for the set login service appears.