Different Size Originals
Different Size Originals enables you to copy differently sized originals together.
|
IMPORTANT
|
|
Make sure that the differently sized originals are of the same weight (paper type).
If originals with different widths are placed in the feeder (DADF-AM1), set the differently sized originals in the following combinations. Other combinations may damage the originals.
- 11" x 17" and LTR, LGL and LTRR, LGL and STMT, LTRR and STMT If Different Size Originals is set, the scanning speed may be slower than normal.
|
|
NOTE
|
|
This function can only be used when the optional feeder (DADF-AM1) is attached.
If Different Size Originals is used with 1 to 2-Sided and the originals for the front and back sides of a two-sided copy are different in size, the copies are output as one-sided copies on paper of their respective sizes.
Combine functions:
You can use Different Size Originals together with the following functions. |
1
Place documents in the feeder (DADF-AM1).
2
Display the Copy mode screen.
Press [
] (COPY/SCAN) to switch to the Copy mode screen.
] (COPY/SCAN) to switch to the Copy mode screen.3
Press [
] or [
] to highlight <Diff. Size Orig.: Off>, and then press [OK].
] or [] to highlight <Diff. Size Orig.: Off>, and then press [OK].
4
Press [] or [] to highlight <On>, and then press [OK].
] or [] to highlight <On>, and then press [OK].
5
Press 
(Start).
(Start).