Checking Network Operation

Check the operation by displaying the Remote UI of the machine.

Start the Web browser of a computer which is connected to a network.

Enter "http://IP address of the machine/" in the address field and press the [ENTER] key on the keyboard.

You can check <IP Address> at step 5 of "Confirming IP Address Settings."

Example: http://192.168.0.215/

Check that the screen of the Remote UI is displayed.

When Remote UI is not displayed:

Check the following.

Whether the computer and hub are connected using a LAN cable

Whether the <Remote UI On/Off> is set to <On>

Next, install the driver and other software.

	When you are in an IPv4 environment:
	"Installing the Drivers and Software"
		If you are using the machine in an IPv6 environment, you cannot use the Scan function.