Preferences

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.
The settings marked with "*1" are only for when the feeder (DADF-AM1) is attached.
For values with "*2" mark, the default value varies depending on the country where you are using the machine.

Audible Tones

Settings
Descriptions
Entry Tone
Specify whether or not the machine makes a sound when a key on the operation panel is pressed:
Off
On
"Setting Whether to Make Sounds When Using the Machine"
Invalid Entry Tone
Specify whether or not the machine makes a sound when an invalid key is
pressed:
Off
On
"Setting Whether to Make Sounds When Using the Machine"
Warning Tone
Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations:
Off
On
"Setting Whether to Make Sounds When Using the Machine"
Job Done Tone
Specify whether the machine makes a sound when a job is completed:
Off
On
"Setting Whether to Make Sounds When Using the Machine"

Display Settings

Settings
Descriptions
Language
Select the display language for the machine:
English, French, Portuguese, Spanish
"Switching the Display Language (Operation Panel or Remote UI)"
Remote UI Language
Select the display language for the Remote UI:
English, French, Portuguese, Spanish
"Switching the Display Language (Operation Panel or Remote UI)"
Contrast
Adjust the display contrast:
-3 to 0 to +3
"Adjusting the Display (Contrast and Inverted Colours)"
Invert Screen Colors
If <On> is specified, the colors of the display are inverted.
Select <On> in case you have difficulty viewing the display:
Off, On
"Adjusting the Display (Contrast and Inverted Colours)"
Millimeter/Inch Switch
Set the unit of measurement for the paper size:
Millimeter*2, Inch
"Changing Units of Measurement"
Notify to Clean Original Scanning Area*1
Display a message to prompt the user to clean the original scanning area of the feeder (DADF-AM1) when the machine detects that it has become dirty.
Off, On
"Displaying the Notify to Clean Original Scanning Area Screen"
Message Display Time
Set the duration during which each message is displayed on the screen:
1 to 2 to 5 (sec.)
"Changing the Message Display Time"
Scrolling Speed
Set the speed to scroll through the menu when all the menu items cannot be shown on the screen:
Slow, Standard, Fast
"Changing the Scroll Speed"
Cursor Movement
When entering characters, specify whether or not to move the cursor to automatically to the next field:
Auto, Manual
"Changing the Cursor Movement"

0HH3-07K