Adjusting the Density

You can adjust the density for a copy job.
If you want to use the adjusted density for all copy jobs, register it as the default density setting for copies. (See "Changing the Default Settings.")
1
Place documents.
2
Display the Copy mode screen.
Press [] (COPY/SCAN) to switch to the Copy mode screen.
3
Press [] or [] to highlight <Density>, and then press [OK].
4
Press [] or [] to adjust the density, and then press [OK].
Select <Auto Density> to copy with the density that is suitable for the document.
If other than <Text> is set as <Original Type>, <Original Type> will be changed to <Text> when you select <Auto Density>.
Press [] or [] to adjust <Manual Density>, when either of <Auto Density> or <Manual Density> is selected.
[] key
Makes the copy density lighter.
[] key
Makes the copy density darker.
5
Press [] (Start).
0J04-06X