Setting the Permission for HTTP Communication
Specify when using HTTP communication (Web browser (Remote UI)).
1
Press [
] (Settings/Registration).
] (Settings/Registration).2
Press [
] or [
] to highlight <System Management Settings>, and then press [OK].
] or [] to highlight <System Management Settings>, and then press [OK].If System Manager Information Settings are specified:
Use the numeric keys to enter the System Manager ID and PIN, and then press [OK].
Press 
(Log In/Out).
(Log In/Out).3
Press [] or [] to highlight <Network Settings>, and then press [OK].
] or [] to highlight <Network Settings>, and then press [OK].
4
Press [] or [] to highlight <TCP/IP Settings>, and then press [OK].
] or [] to highlight <TCP/IP Settings>, and then press [OK].
5
Press [] or [] to highlight <Use HTTP>, and then press [OK].
] or [] to highlight <Use HTTP>, and then press [OK].
6
Press [] or [] to highlight <Off> or <On>, and then press [OK].
] or [] to highlight <Off> or <On>, and then press [OK].
|
<Off>
|
Prevents HTTP communication.
|
|
<On>
|
Allows HTTP communication.
|
7
Press [] (Settings/Registration) to close the Settings/Registration screen.
] (Settings/Registration) to close the Settings/Registration screen.8
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.