Copying 2-Sided Document to 2-Sided(imageRUNNER 2202N/2002N Only)

You can make 2-sided copies from 2-sided documents.
IMPORTANT
Precautions on 2-Sided Copying:
Do not touch your document when making 2-sided copying until the process is complete. After copying on the front side is complete, the document is partially output, reserved, and fed into the machine again for copying on the back side.
NOTE
This function can only be used when the optional feeder (DADF-AM1) and Duplex Unit-C1 are attached to the imageRUNNER 2202N/2002N.
1
Place documents in the feeder.
"Placing Documents in the Feeder(imageRUNNER 2202N/2002N Only)"
"Supported Document Types"
2
Display the Copy mode screen.
Press [] (COPY/SCAN) to switch to the Copy mode screen.
3
Press [] (2-Sided).
4
Press [] or [] to highlight <2->2-Sided>, and then press [OK].
To specify the 2-sided copy format:
(1)
Press [] or [] to highlight <Original/Finishing Type>, and then press [OK].
(2)
Press [] or [] to highlight <2->2-Sided>, and then press [OK].
(3)
Press [] or [] to highlight how to open the original document, and then press [OK].
(4)
Press [] or [] to highlight how to open the output, and then press [OK].
5
Press [] (Start).
0FJJ-03A