Cleaning the Platen Glass

Clean the platen glass and the underside of the feeder/platen cover following the procedure below.
WARNING
When cleaning the machine, first turn OFF the main power switch and disconnect the power cord. Failure to observe these steps may result in a fire or electrical shock.
IMPORTANT
If the platen glass or the underside of the feeder/platen cover is dirty, the original may not be scanned clearly.
1
Clean the platen glass and the underside of the feeder/platen cover with a cloth which is wrung after being dampened in water, and then wipe them clean with a soft, dry cloth.
IMPORTANT
If stains won't come out, use detergent instead of water.
0FJJ-0E3