Scanning an Image from an Application

You can scan an image from a TWAIN- or WIA-compliant application and use the image in that application. The procedure varies depending on the application. This section shows an example.
1
Place documents.
"Placing Documents"
"Supported Document Types"
NOTE
When scanning from the platen glass:
Scanning multiple pages is not available when scanning from the platen glass.
Applications that do not support scanning multiple documents:
"Paint" on Windows XP/Vista/7/8
Microsoft Office XP
(Word 2002, Excel 2002, PowerPoint 2002, etc.)
Microsoft Office 2000
(Word 2000, Excel 2000, PowerPoint 2000, etc.)
If you are using the applications mentioned above, scan only one page at a time.
If you are using the imageRUNNER 2202N/2002N, place only one document in the feeder, as the following problems may occur if multiple documents are placed.
The second and subsequent sheet documents are not scanned.
After all documents are scanned, <An error occurred.> appears in the display.
The next scanning cannot be performed.
2
Press [] (COPY/SCAN) to switch to the Scan mode screen.
3
Press [] or [] to highlight <Remote Scanner>, and then press [OK].
The machine is now waiting to be scanned.
4
Start the application to be used.
5
Select a scanning command.
6
Select a scanner driver.
The ScanGear MF or WIA driver can be used on Windows XP/Vista/7/8.
7
Specify the scanner settings as needed -> click [Scan].
Scanning starts.
For details, see the following.
"Using the ScanGear MF"
"Scanning Using the WIA Driver"
0FJJ-05F