Setting the Auto Reset Time

Set the Auto Reset time to return to the default settings after copying is completed or when a key operation is not performed for a certain period of time.
NOTE
The machine does not return to the default settings when:
the Settings/Registration screen is displayed
a job is currently processing
a message appears on the display and the Error indicator is blinking
the documents are set in the feeder(imageRUNNER 2202N/2002N Only)
the remote scanner is online
the default setting registration for the multi-purpose tray is disabled and the multi-purpose tray is set
1
Press [] (Settings/Registration).
2
Press [] or [] to highlight <Timer Settings>, and then press [OK].
3
Press [] or [] to highlight <Auto Reset Time>, and then press [OK].
4
Press [] or [] to specify the time for the Auto Reset Time to activate, and then press [OK].
The machine does not return to the default settings automatically when you set the timer to <0>.
When using the imageRUNNER 2202N/2002N, you can also enter values using the numeric keys.
5
Press [] (Settings/Registration) to close the Settings/Registration screen.
0FJJ-095