Feeder (DADF-AM1) (Optional)(imageRUNNER 2202N/2002N Only)
If a paper jam occurs in the feeder, follow the procedure described below to remove the jammed paper.
|
NOTE
|
|
A feeder can be used when the optional DADF-AM1 is attached to the imageRUNNER 2202N/2002N.
|
1
Remove originals from the original supply tray.
2
Open the feeder cover.
3
Open the inner cover, holding it by its front tab.
4
Turn the feed dial inside the inner cover in the direction of the arrow (clockwise), and remove any jammed originals.
|
IMPORTANT
|
|
Do not pull the original forcibly, because it may tear.
|
5
Close the inner cover.
 CAUTION |
|
When closing the inner cover, be careful not to get your fingers caught, as this may result in personal injury.
|
6
Close the feeder cover.
If you cannot remove the original, proceed to step 7.
If you have removed the original, the procedure is complete.
|
CAUTION |
|
When closing the feeder cover, be careful not to get your fingers caught, as this may result in personal injury.
|
7
Lift the feeder, and remove any jammed originals.
8
Close the feeder.
|
CAUTION |
|
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
|
9
Open the feeder cover
10
Close the feeder cover.
|
CAUTION |
|
When closing the feeder cover, be careful not to get your fingers caught, as this may result in personal injury.
|