Specifying the Sound Settings

The machine produces sounds in a variety of situations, such as when a key is pressed or when a paper jam or error occurs. Specify the sound settings by following the procedure below.
1
Press .
2
Use / to select <Preferences>, and press .
3
Select <Sound Volume Control>, and press .
4
Select a setting, and press .
Setting
Description
Procedure
<Fax Tone>*1
Sound produced during a fax transmission
Go to step 5
<Ring Tone>*1
Sound produced when an incoming fax is received
<TX Done Tone>*1
Sound produced when fax sending is complete
<Only When Error Occurs>    <On> or <Off> (Select whether to set the machine to produce sound only when an error has occurred)    Go to step 5
<RX Done Tone>*1
Sound produced when fax receiving is complete
<Scanning Done Tone>*1
Sound produced when fax document scanning is complete
<Entry Tone>
Sound produced each time a key on the operation panel is pressed
<On> (Sound is produced) or <Off> (No sound is produced)    Go to step 6
<Invalid Entry Tone>
Sound produced when an invalid key operation is performed, such as when you enter a number outside the valid setting range
<Restock Supplies Tone>
Sound produced when the toner cartridge is almost empty
<Warning Tone>
Sound produced when a paper jam or other error occurs
<Job Done Tone>
Sound produced when an operation such as copying or scanning is complete
<Energy Saver Alert>
Sound produced when the machine enters or exits sleep mode
<Original in Feeder Detection Tone>*2
Sound produced when originals are placed in the feeder.
*1 Only available for the imageRUNNER 1435iF.
*2 Only available for the imageRUNNER 1435iF / 1435i.
5
Use / to adjust the volume, and press .
To disable sound, set the slider to the leftmost.
The screen for <Fax Tone> is shown below as an example.
6
Press  to close the menu screen.
0KCF-021