Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.
NOTE
When Department ID Management is enabled (Setting the Department ID Management), this setting is not required.
1
Start the Remote UI and log on in System Manager Mode. Starting the Remote UI
2
Click [Settings/Registration].
3
Click [Security Settings]  [Remote UI Settings].
4
Click [Edit...].
5
Select the [Use Remote UI Access PIN] check box and set the PIN.
[Use Remote UI Access PIN]
If you select this check box, you must enter a PIN to access the Remote UI.
[Set/Change PIN]
To set a PIN, select the check box and enter a number of up to seven digits both in the [PIN:] and [Confirm:] text boxes.
6
Click [OK].
NOTE
If PIN is forgotten
Set a new Remote UI Access PIN in the settings menu on the operation panel. Perform the following operation on the machine: Press   <System Management Settings>  <Remote UI Settings>  <Remote UI Access Security Settings>  <On>  Enter PIN  <Apply>  Enter PIN (Confirm)  <Apply>  .
If Remote UI settings are initialized
The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. Initializing Menu
0R55-0FS