Basic Copy Operations

1
Place the document. Placing Documents
2
Press .
3
Enter the number of copies using the numeric keys.
Enter a quantity from 1 to 999.
Press  to cancel the entered quantity.
4
Specify the copy settings as necessary.
Use / to select the settings. Various Copy Settings
  
5
Press .
Copying starts.
If you want to cancel copying, press   <Yes>  . Canceling Copies
When placing documents in the feeder in step 1
The document is automatically scanned.
When placing documents on the platen glass in step 1
  
NOTE:
When the <Size/Settings Mismatch> or <The memory is full. Scanning will be canceled. Print?> message is shown in the display.
When an Error Message Appears
You can check the copy history, such as when or how many copies have been made. Press (Status Monitor) <Copy/Print Job>    <Copy Job Log>    select the copy document you want to check  .
IMPORTANT
When copying documents with text or images that extend to the edges of the page
The edges of the document might not be copied. For more information about the scan margins, see Scan Area.
TIPS
If you always want to make copies with the same settings:
If you want to register frequently used setting combinations:
If you want to save toner for copying:
0RCJ-01C