Uneven Gloss Correction

When the temperature of the pressure belt rises excessively, uneven gloss may occur. This mode enables you to reduce the uneven gloss by adjusting the temperature rise level of the pressure roller.
IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.
NOTE
Changing this setting may have an effect on the paper curl. If necessary, adjust the [Curl Correction Level] in Paper Type Management Settings. (See "Curl Correction for Each Paper Deck.")
Increasing the value requires the machine to take a long time to control the temperature. This may result in a slight decrease of the machine's productivity.

1.
Press (Settings/Registration).
2.
Press [Adjustment/Maintenance] → [Adjust Image Quality] → [Correct Uneven Gloss].
3.
Press [-] or [+] to set the level of temperature management → press [OK].
Decrease the value to increase the control over excessive temperature rise.
0S9Y-071