[Basic] Sheet

Enables you to specify the settings for the finishing functions. This sheet is displayed by clicking [Properties] in the [cngplp2l] dialog box, then clicking the [Basic] tab. (see "Printing Using the Driver UI").

[Print Style]

Specifies one-sided and two-sided printing. This is displayed only when you are using a printer model that supports 2-sided printing.

[1-sided Printing]

Prints on 1 side of the paper.

[2-sided Printing]

Prints on both sides of the paper.

[Finishing]

Specifies the paper output method.

[Off]

Printouts of a complete job are grouped (non-sorted).

[Collate]

Printouts of a complete job are collated (default).

[Binding Location]

Specifies the binding location. The binding location is based on the document being placed in a vertical (portrait) state.

[Long Edge (Left)]

Performs binding of the long edge.

[Short Edge (Top)]

Performs binding of the short edge.

[Color Mode]

Specifies whether the printer should print in color or black and white.

[Black and White]

Prints in black and white, even for color print data.

[Color]

Prints using four colors: CMYK (Cyan, Magenta, Yellow and Black).

[Toner Save]

By using the toner save mode, you can print by thinning out the print data (Default: Off). However, using the toner save mode may decrease print density, making printed text look patchy.
The print density adjustment effect increases in the following order (print becomes lighter).

[Off]	→	[Mode 1]	→	[Mode 2]	→	[Mode 3]
(Effect: Low)						(Effect: High)

You may only be able to use [Off] and [On], depending on the device you are using.

[OK]

Enables the settings for only the current print job.

[Restore Defaults]

Returns all the settings to their defaults.

[Cancel]

Cancels the settings you have made and closes the detailed settings dialog box.