Changing the Default Screen for Fax

You can set whether to display the [Standard], [One-Touch], [Favorite Settings], or [Address Book] screen when you select a function from the Main Menu, when Auto Reset is activated, or when you press (Reset).
This mode can be set when the Fax function is available for use. For information on the optional products required to use the Fax function, see "Optional Products Required for Each Function."
1.
Press (Settings/Registration).
2.
Press [Function Settings] → [Send] → [Fax Settings].
3.
Press [Default Screen].
4.
Specify the settings → press [OK].
Details of each item are shown below.
[Standard]:
Displays the screen for selecting a line if [Display Select Line Screen] is set to 'On'.
Displays the screen for specifying the destination if [Display Select Line Screen] is set to 'Off'.
[One-Touch]:
Displays the screen for specifying one-touch buttons.
[Favorite Settings]:
Displays the screen which is registered in [Register Favorite Settings].
[Address Book]:
Displays the screen with the Address Book open.
NOTE
If you select [Address Book], you can select the type of address book to display. For more information, see "Changing the Default Display of the Address Book."
12HJ-0C8