Different Size Originals

This mode enables you to scan different size originals (A3 and A4) together.

IMPORTANT
Paper Size in which the width of leading edge of each page are different (e.g., A3 and A5) cannot be fed together. Always smooth out any folds in your originals before placing them into the feeder.

Press [Fax].

Specify the destination → press [Options] → [Different Size Originals].

Select the type of originals → press [OK] → [Close].

[Same Width]:	Press this key if you are placing originals with the same width.
[Different Width]:	Press this key if you are placing originals with different widths.

IMPORTANT
If you set the Scan Size setting to anything other than [Auto], all of the originals are scanned in the specified size. If you want to scan each original in its original size, make sure to set the Scan Size to [Auto]. If different size originals are placed in the feeder, make sure that they are of the same weight (paper type). If you set the Different Size Originals mode, the scanning speed may be slower than normal. If you send different sized originals, the paper size used to output the faxes on the recipient's machine is the size of the largest original you sent. For example, if you send A4 and A3 originals, they will both be output on A3 paper at the recipient's machine.

IMPORTANT

If you set the Scan Size setting to anything other than [Auto], all of the originals are scanned in the specified size. If you want to scan each original in its original size, make sure to set the Scan Size to [Auto].

If different size originals are placed in the feeder, make sure that they are of the same weight (paper type).

If you set the Different Size Originals mode, the scanning speed may be slower than normal.

If you send different sized originals, the paper size used to output the faxes on the recipient's machine is the size of the largest original you sent. For example, if you send A4 and A3 originals, they will both be output on A3 paper at the recipient's machine.