Setting Up a Computer as a File Server

To send data from the machine to a computer on your network, you need to specify the settings of the computer for receiving data.

You can send data over a TCP/IP network to any of the following:

FTP server (Windows Server 2003 R2/Server 2008/Vista/7/Server 2008 R2/8/8.1/Server 2012/Server 2012 R2, UNIX, Linux, Mac OS X)

WebDAV server (Windows Server 2003/Server 2008/Vista/7/Server 2008 R2/8/8.1/Server 2012/Server 2012 R2, UNIX, Linux, Mac OS X)

Windows shared folder (Windows Server 2003/Server 2008/Vista/7/Server 2008 R2/8/8.1/Server 2012/Server 2012 R2)

Samba shared folder (UNIX/Linux/Mac OS X)

This section describes how to set up a computer as an FTP/WebDAV server.

For instructions on configuring Windows and Samba shared folders, see "Setting Up a Computer as a File Server."

FTP Server Settings

WebDAV Server Settings

IMPORTANT
Samba 2.2.8a or later is supported. This section describes only the procedures for setting up a computer receiving data sent from the machine. To send data from the machine to a server on the network, you must enter an address setting from the control panel. For instructions on specifying recipient address settings, see "Specifying Destinations." The following procedure explains a sample FTP/WebDAV server setup. Depending on your environment, the actual setup procedure may differ.

IMPORTANT

Samba 2.2.8a or later is supported.

This section describes only the procedures for setting up a computer receiving data sent from the machine. To send data from the machine to a server on the network, you must enter an address setting from the control panel. For instructions on specifying recipient address settings, see "Specifying Destinations."

The following procedure explains a sample FTP/WebDAV server setup. Depending on your environment, the actual setup procedure may differ.